Field Application Methods

Military Traffic – Heavy, High, Continuous, Extreme

Dust Control (Driving Surface Areas, Helipads, Landing Areas)

This application method is intended to provide a solution for areas requiring dust control where traffic is present and for protecting soil from wind erosion. This type of application is not intended for soil stabilization use. During times of extensive vehicular use it may be desirable to apply maintenance applications (frequency of applications dependent on volume of usage). Maintenance application will be at lower application rates and less and less frequency over time. SarAnti-Dust does not dry out, wash out, evaporate, or harden, remaining in the soil for extended periods of time. This means eventually all of the loose particles will become treated over time.

Recommended Application Rates (per surface acre)

The US Military uses a minimum application rate of 800 gallons of SarAnti-Dust per surface acre for heavy, high, continuous use traffic areas. Application rates may be adjusted up or down as traffic extremes change or warrant. Military usage has been 1600 – 2000 gallons per acre and higher in extreme dust such as found in certain areas of the middle east.

Recommended Application Method(s)

SarAnti-Dust may be applied with a tank and pump, hydroseeder, water tanker, tank and gravity feed drip bar, or similar equipment - sized appropriately for the size of the application area.